Availability: 2 in stock

Alto TS315 2000W 15" Active Loudspeaker

Availability: 2 in stock
R6,495.00 R10,395.00
Seen a better price? Let us know!
2000W PA Speaker with 15" Low-frequency Driver and 1" High-frequency Driver (each)
38% Off. Confirm your order at this great price...


The new Alto Professional Truesonic TS3 Series does everything you demand in a no-compromise family of professional loudspeakers. These speakers solve every performance and installation challenge you have. They are high-performance in every sense: Their new transducers and amplifiers enable them to play extremely loud and clear, without compromise or restriction. And they are “high-performance” from a concept and manufacturing standpoint—we made sure that every aspect of their design outperformed what it had to do. The end result are loudspeakers that achieve a level of excellence and refinement that defies expectations. Defies your expectations.

Class Leading

Designed to play louder and handle more power than their already-impressive predecessors, the wildly-successful TS2 Series. They also have a new horn-loaded high-frequency driver. This impressive transducer has a brand-new heat sink design that provides exceptional heat dissipation for impressive power-handling, even at all-night-long concert levels. Because these new drivers can safely handle the additional power, the TS3’s take full advantage of the increased wattage and will play at higher SPLs with lower distortion.

Power to Perform

Alto even made the TS3’s easier to use, with an updated control panel and clearer control indications and detents that make for a faster, more precise setup. 2000 watts of bi-amplified power, newly-designed drivers and easier, more satisfying controls and setup—the new TS3 range doesn’t merely meet your requirements. It makes you re-think what’s possible.

    Alto TS315 2000W 15" Active Loudspeaker Features:

    • Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
    • LF Driver: 15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
    • HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
    • Crossover: 2 kHz
    • Maximum SPL: 134 dB peak, 131 dB continuous (dB SPL @ 1 m)
    • Frequency Response: 50 - 20 kHz (+/- 3 dB)
    • Frequency Range: 43 Hz - 22 kHz (-10 dB)
    • Horn Coverage: 90° H x 60° V nominal
    • Equalization: Contour Switch Low and High Frequency +3dB Boost
    • Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
    • Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
    • Indicators: 2 x Power LED (front and rear), Clip limiter LED
    • Protection: Electronic clip, Thermal and transducer overdrive protection
    • Power Connection: IEC with Mains Fuse
    • AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
    • Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
    • Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral M10 suspension points, Wedge monitor
    • Dimensions: (H x W x D): 25.7” x 16.6” x 15.4” / 652mm x 421mm x 392mm
    • Net Weight: 41.3 lbs. / 18.8 kg.
    • Design Origin: Designed and tuned in the USA
    • Accessories: TSB125 Bracket, TS215 Cover
            Power Configuration Bi-amped
            LF Driver Size 15” woofer, 2.5” voice coil
            HF Driver Size 1” titanium diaphragm, 1” voice coil
            Amplifier Class D SMPS, 1100 watts peak
            Horn Coverage 90°H x 60°V
            Frequency Response 50 Hz – 20 kHz (-3dB)
            Crossover Frequency 2 kHz
            Maximum Peak SPL 129 dB at 1m
            Connector (2) XLR+1/4" combo jack mic/line inputs (1) XLR Mix output
            External Controls Volume control / Power ON with green
            Electronic Protection Electronic clip, thermal and transducer overdrive protection
            Enclosure Material Injection-molded polypropylene
            Mounting Options Stand and pole-mountable with integral M6 suspension points
            Height 15.6"
            Width 14.1"
            Depth 25.7"
            Weight 32.7 lbs.
            Manufacturer Part Number TS315