{"product_id":"metric-halo-lio-8-usb-audio-interface","title":"Metric Halo LIO-8 USB Audio Interface","description":"\u003cp\u003e[custom_html]\u003c\/p\u003e\n\u003cdiv class=\"product-info__description__brand\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-info__description__text\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003eTracking, Mixing, and Mastering, 8 Line I\/O via DB25, 8 Channel A\/D-D\/A 192 kHz, USB C Audio Interface.\n\u003c\/span\u003e\u003c\/div\u003e\n[\/custom_html]\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eThe Metric Halo LIO-8 mkIV is a precision USB audio interface and 8-channel A\/D-D\/A converter offering an advanced feature set and a hybrid DSP\/FPGA processing system and hosting a powerful software package that includes over 100 zero-latency plug-ins.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis lightweight low-power single-rack-space unit supplies 8 line inputs and 8 line outputs, all on DB25 connectors. The versatile interface offers a 128-channel, 64-bus mixer, supports resolutions of up to 192 kHz, and offers MIDI I\/O along with MHLink networking and SCP computer linking, making it well suited for use as a core studio component for tracking, mixing, and mastering.\u003c\/p\u003e\n\u003cp\u003eThe updated mkIV version of the LIO-8 mkIV offers a warm, open, and very detailed musical sound and uses an integrated relay mute on the analog outputs to eliminate clicks and thumps when powering up and down. Fully calibrated analog I\/O levels ensure that round trips through the converters maintain consistent levels, while the latency has been reduced from 116 samples down to approximately 18. The power consumption and heat generation has also been greatly reduced, allowing users to conserve energy.\u003c\/p\u003e\n\u003ch4\u003eMultichannel Mixing and Surround Support\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe LIO-8 mkIV is a multisource, multidestination, surround-capable (up to 7.1.4 Dolby Atmos) monitor controller with analog gain control and relay hard mutes.\u003c\/li\u003e\n\u003cli\u003eThe unit uses a retina-enabled, 64-bit, cross-platform console application: MIO Console 3d.\u003c\/li\u003e \n  \u003cli\u003eMIO Console provides the UI to control the mkIV Mixer. This mixing engine is a full blown mixing console, not a mere interface monitor mixer. It features multibus mixing, arbitrary routing, input and output multing, zero-latency hardware plug-ins, surround support, and headphone amp control.\u003c\/li\u003e\n\u003cli\u003eThe mixer supports up to 128 channels and 64 buses at sample rates up to 192 kHz.\u003c\/li\u003e\n  \u003cli\u003eThe LIO-8 mkIV supports adding up to 8 channels of Metric Halo’s renowned ULN-R preamps in 4 channel blocks. These boutique preamps are famous for their pristine, low-distortion, completely unveiled sound.\u003c\/li\u003e\n\u003cli\u003eAvailable separately, these ULN-R preamps provide up to 90 dB of digitally controlled analog gain in precisely recallable 0.5 dB steps along with independently switchable P48 phantom power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eUSB Connectivity with MHLink, SCP, and EdgeBus Flexibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe USB class-compliant audio interface allows you to connect to any USB audio host (Mac, iPhone, iPad, Android, Windows 10+, or Linux) without having to install a driver.\u003c\/li\u003e\n\u003cli\u003eMHLink provides an ultralow-latency ultrahigh-bandwidth self-configuring audio and data backplane between multiple MH units as well as a native Gigabit Ethernet interface to the computer.\u003c\/li\u003e \n  \u003cli\u003eIn an MHLink system, the USB port on each mkIV unit provides a unique Satellite Computer Port (SCP) capability.\u003c\/li\u003e\n\u003cli\u003eSCP gives you the ability to patch a satellite computer with full routing into the mkIV Mixer. On multiple unit systems, all SCP ports are available simultaneously.\u003c\/li\u003e \n  \u003cli\u003eIntegrate software instruments, sample players, client computers, and mobile devices into your system without the need for additional interfaces or complicated clocking setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eLoopback: Flexible Routing\/Rerouting\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny channel in the MIO Mixer can be routed to any output, including outputs sent back to the host or to an SCP port.\u003c\/li\u003e\n\u003cli\u003eRoute audio between apps or computers without any additional software or an additional complex routing model.\u003c\/li\u003e \n\u003c\/ul\u003e\n\u003ch4\u003eSignal Processing: FPGA\/DSP Hybrid Engine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe custom hybrid DSP\/FPGA processing system provides massive amounts of processing and plenty of memory for high-precision, fixed-point mixing, crosspoint interpolation, metering, and routing, as well as flexible instantiable floating-point plug-in processing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePlug-Ins: Zero-Latency DSP\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOver 100 plug-ins are supplied including the entire Metric Halo Production Bundle and the +DSP Bundle with no additional license fees or complicated licensing tools.\u003c\/li\u003e\n\u003cli\u003eThese bundles add enormous value to the package, with world-class plug-ins running at zero latency on the LIO-8 mkIV DSP for a wide variety of  tracking and mixing applications.\u003c\/li\u003e \n  \u003cli\u003eBullet point\u003c\/li\u003e \n\u003c\/ul\u003e\n\u003ch4\u003eFront-Panel Metering and Control-Surface Support\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDetailed front-panel metering with control knobs makes it easy to see what your doing and quickly adjust gain settings.\u003c\/li\u003e\n\u003cli\u003eThe LIO-8 mkIV supports a variety of control surfaces (Mackie, EuCon, iPad, and Tablet) giving you tactile remote control over mix, monitor, and recording.\u003c\/li\u003e \n\u003c\/ul\u003e\n\u003ch4\u003eBoot States and Format Conversion\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStore the full configuration of your multibox MHLink system into nonvolatile memory Boot States, so that the full configuration is automatically restored when the system powers on—without requiring a connection to the computer or MIO Console.\u003c\/li\u003e\n\u003cli\u003eCrosspoint routing and the ability to have all I\/O ports simultaneously active enables you to use the ULN-8 mkIV as a flexible format converter.\u003c\/li\u003e \n  \u003cli\u003eBoot states allow you to program and set the unit for standalone format conversion.\u003c\/li\u003e \n\u003c\/ul\u003e\n\u003ch4\u003eSession: Integrated Tracking DAW\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSession is a complete tracking DAW that supports Live, Take-Based, and Overdub recording workflows.\u003c\/li\u003e\n\u003cli\u003eAlways available and completely integrated with the hardware, it launches instantly as part of MIO Console, and it doesn't require any licenses or dongles.\u003c\/li\u003e \n\u003c\/ul\u003e\n\u003ch4\u003eWhat Metric Halo says...\u003c\/h4\u003e\n\u003cp\u003eIt’s All About the Sound…\u003c\/p\u003e\n\u003cp\u003eA complete, modular, expandable Recording \u0026amp; Mixing Console with world-class converters, a studio full of outboard gear and a professional Atmos capable analog monitor controller.\u003c\/p\u003e\n\u003cp\u003eBased on the Orpheus’ audio path and clock circuitry, Lyra is ideal for those who don’t require a large I\/O count, but do demand the highest quality and most transparent AD\/DA available. Integrated with a future-proof computer interface. To celebrate the release of MH Production Bundle v4, all new purchases of Metric Halo LIO-8 mkIV include a free MH Production Bundle v4 license in addition to the bundled hardware versions that run with zero latency on the DSP in the interfaces!\u003c\/p\u003e\n\u003ch4\u003eHeavenly Metric Halo Sound mk IV Analog, (optional) Preamps \u0026amp; Conversion\u003c\/h4\u003e\n\u003cp\u003eFor over 20 years, Metric Halo sound has been beloved by musicians and audio engineers the world over. Our 4th generation mkIV analog and converter stages enhance the already world-class design of the LIO-8 to provide you with warm yet detailed, open \u0026amp; musical sound that captures and presents your work in its best light.\u003c\/p\u003e\n\u003ch4\u003eMonitoring Analog + Atmos + Processing\u003c\/h4\u003e\n\u003cp\u003eThe mkIV features a full featured multi-source, multi-destination surround capable (up to 7.1.4 Dolby Atmos®) monitor controller with analog gain control and relay hard mutes.\u003c\/p\u003e\n\u003ch4\u003eMixing 128 Channels | 64 Buses | 192k\u003c\/h4\u003e\n\u003cp\u003eImagine having a large-format recording and mixing console in a 1RU unit. mkIV is just that — you will not be limited by this mixer.\u003c\/p\u003e\n\u003ch4\u003eMHLink Network Audio Backplane\u003c\/h4\u003e\n\u003cp\u003eMHLink provides an ultra-low-latency, ultra-high-bandwidth self configuring audio and data backplane between multiple MH units as well as a native Gigabit Ethernet interface to the computer.\u003c\/p\u003e\n\u003ch4\u003eUSB Driverless Class Audio\u003c\/h4\u003e\n\u003cp\u003eEvery mkIV unit includes a USB Class Audio interface that allows you to connect to any USB Audio host (Mac, iPhone, iPad, Android, Windows 10+, or Linux) without having to install a driver.\u003c\/p\u003e\n\u003ch4\u003eSCP USB I\/O Sidecar\u003c\/h4\u003e\n\u003cp\u003eIn an MHLink system, the USB port on each mkIV unit provides our unique “Satellite Computer Port (SCP)” capability. SCP gives you the ability to patch a satellite computer with full routing into the mkIV Mixer. On multiple unit systems, all SCP ports are available simultaneously. Integrate software instruments, sample players, client computers and mobile devices into your system without the need for additional interfaces or complicated clocking setups.\u003c\/p\u003e \n\u003ch4\u003eLoopback Flexible Re-routing\u003c\/h4\u003e\n\u003cp\u003eAny channel in the MIO Mixer can be routed to any output, including outputs sent back to the host or to an SCP port. Route audio between apps or computers without any additional software or an additional complex routing model.\u003c\/p\u003e\n\u003ch4\u003eSignal Processing\nFPGA\/DSP Hybrid Engine\u003c\/h4\u003e\n\u003cp\u003emkIV features our custom hybrid DSP\/FPGA processing system that provides massive amounts of processing and gobs of memory for high-precision fixed point mixing, cross-point interpolation, metering and routing as well as flexible, instantiable floating-point plug-in processing.\u003c\/p\u003e\n\u003ch4\u003ePlug-ins\nZero-Latency DSP\u003c\/h4\u003e\n\u003cp\u003emkIV bundles over a 100 zero-latency hardware plug-ins, including the entire Metric Halo Production Bundle, the +DSP Bundle, the Make Believe Bundle and the Sontec MES-432D9D with no additional license fees or complicated licensing tools.\nThat’s over $3100 worth of world-class plug-ins bundled for use on the LIO-8 mkIV DSP for free!\u003c\/p\u003e\n\u003ch4\u003eControl Surface\nMackie | EuCon | iPad | Tablet\u003c\/h4\u003e\n\u003cp\u003emk IV supports a variety of control surfaces giving you tactile remote control over mix, monitor, and recording.\u003c\/p\u003e\n\u003ch4\u003eEdgeBus Expansion I\/O HW Plug-ins\u003c\/h4\u003e\n\u003cp\u003eEach mkIV unit includes an open EdgeBus Card slot. The EdgeBus Card slot allows you to expand your system with additional I\/O without having to add a new interface.\u003c\/p\u003e\n\u003ch4\u003eBoot States Standalone Operation\u003c\/h4\u003e\n\u003cp\u003emk IV allows you to store the full configuration of your multibox MHLink system into non-volatile memory so that the full configuration is automatically restored when the system powers on - without requiring a connection to the computer or MIOConsole.\u003c\/p\u003e\n\u003ch4\u003eFormat Conversion Digital and Analog Conversion\u003c\/h4\u003e\n\u003cp\u003eCrosspoint routing and all I\/O ports simultaneously active enables you to use the mkIV as a flexible format converter. Boot states allow you to program and set the unit for standalone format conversion\u003c\/p\u003e\n\u003ch4\u003eSession Integrated Tracking DAW\u003c\/h4\u003e\n\u003cp\u003emkIV includes complete tracking DAW that supports Live, Take-based and Overdub recording workflows. Always available and completely integrated with the hardware. It launches instantly as part of MIO Console and it doesn't require any licenses or dongles.\u003c\/p\u003e\n\u003ch4\u003eLIO-8 mkIV Key Hardware Features\u003c\/h4\u003e\n\u003cp\u003eWhether you are on location, in the studio or the mastering room, the LIO-8 mkIV has what it takes for you to get the job done.\u003c\/p\u003e\n\u003cp\u003eLIO-8 mkIV is built on Metric Halo’s core 3d Technology, so it interoperates seamlessly with all existing MH 3d interfaces.\u003c\/p\u003e \n\u003cp\u003eSince it is amazingly flexible, expandable and future-proof by design, your system always scales to meet your needs. Each unit includes these hardware features:\u003c\/p\u003e \n\u003cul\u003e\n\u003cli\u003eMetric Halo’s unique 3d Core Digital Engine with MHLink\u003c\/li\u003e\n\u003cli\u003e8 channels A\/D with Analog Trim\u003c\/li\u003e \n  \u003cli\u003e8 channels D\/A with Analog Gain\u003c\/li\u003e\n\u003cli\u003eDedicated HP D\/A and Analog Gain\u003c\/li\u003e \n  \u003cli\u003eUltra-low converter latency\u003c\/li\u003e\n\u003cli\u003eConverter latency reduced by 85% compared with previous generation\u003c\/li\u003e \n  \u003cli\u003eRound-trip through Converters + Mixer + DSP + Monitor:\u003c\/li\u003e\n\u003cli\u003e≈ 0.9ms @ 44.1k\u003c\/li\u003e \n  \u003cli\u003e≈ 0.2ms @ 192k\u003c\/li\u003e\n\u003cli\u003e2 channels Guitar\/Bass DI inputs\u003c\/li\u003e \n  \u003cli\u003e8 channels AES Output\u003c\/li\u003e\n\u003cli\u003e8 channels AES Input\u003c\/li\u003e \n  \u003cli\u003eSMPTE LTC I\/O\u003c\/li\u003e\n\u003cli\u003eMIDI I\/O\u003c\/li\u003e \n  \u003cli\u003e128 Channel x 64 bus mixer\u003c\/li\u003e \n  \u003cli\u003eIntegrated DSP\u003c\/li\u003e \n  \u003cli\u003eFull support for 192k\u003c\/li\u003e \n  \u003cli\u003eDetailed Front panel metering\u003c\/li\u003e \n  \u003cli\u003eFP control with dedicated gain knobs\u003c\/li\u003e \n  \u003cli\u003eIR Remote Control support\u003c\/li\u003e \n  \u003cli\u003eMH EdgeBus Card slot\u003c\/li\u003e \n  \u003cli\u003eMHLink Gigabit Ethernet connectivity\u003c\/li\u003e \n  \u003cli\u003eUSB-C connectivity\u003c\/li\u003e\n  \u003cli\u003eLow power, cool-running design with no fans\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe mkIV excels in these key areas:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTracking\u003c\/li\u003e\n\u003cli\u003eLive\u003c\/li\u003e\n  \u003cli\u003eRemote Mic Pre\u003c\/li\u003e\n\u003cli\u003eDigital Snake\u003c\/li\u003e \n  \u003cli\u003eHeadphone Amp\u003c\/li\u003e\n\u003cli\u003eMonitor Control\u003c\/li\u003e \n  \u003cli\u003eIR Remote\u003c\/li\u003e\n\u003cli\u003eIR Remote\u003c\/li\u003e \n  \u003cli\u003eMixing\u003c\/li\u003e\n\u003cli\u003eMonitors\u003c\/li\u003e \n  \u003cli\u003eA\/D\/A\u003c\/li\u003e\n\u003cli\u003eDSP Processing\u003c\/li\u003e \n  \u003cli\u003eDI\u003c\/li\u003e\n\u003cli\u003eCue Playback\u003c\/li\u003e \n  \u003cli\u003eTactile Control\u003c\/li\u003e\n\u003cli\u003eMastering\u003c\/li\u003e \n  \u003cli\u003eProduction\u003c\/li\u003e\n\u003cli\u003eActive Analog Split\u003c\/li\u003e \n  \u003cli\u003eFormat Conversion\u003c\/li\u003e\n\u003cli\u003eMeter Bridge\u003c\/li\u003e \n  \u003cli\u003eSession\u003c\/li\u003e \n  \u003cli\u003eWireless Control\u003c\/li\u003e \n\u003c\/ul\u003e\n\u003ch4\u003eIntegration for the Win\u003c\/h4\u003e\n\n\u003cp\u003eBy implementing all the functions of a complete end-to-end signal chain solution in a single package, the LIO-8 mkIV is able to provide unprecedented capability and quality in a lightweight, low-power, single rack space unit. This integration has significant benefits in the form of reduced setup time and greater reliability, reduced cabling, weight, power consumption and cost, even as it provides unprecedented flexibility and performance.\u003c\/p\u003e\n\u003cp\u003eThe MHLink routing and transport architecture allows you to build a system with units distributed up to 100 meters apart with no added latency.\u003c\/p\u003e\n\u003cp\u003eMHLink's auto-configuration and hardware aggregation make it so the entire system appears to the host computer as a single unified interface. Audio, command and clock transport with up to 256 channels of audio (at 192k) is accomplished with light-weight, inexpensive, readily available Cat 5e cabling.\u003c\/p\u003e\n\u003cp\u003eThe new mkIV design is eco-friendly and uses very little energy to provide its incredible performance and power. Even when every mic channel is powering a 48v phantom mic, the LIO-8 mkIV only consumes 25 watts, and without phantom uses less than 21 watts.\u003c\/p\u003e\n\u003cp\u003eThis low-power design allows the mkIV to run cool and stable. No noisy fans required.\u003c\/p\u003e\n\u003ch4\u003eMetric Halo Sound\u003c\/h4\u003e\n\u003cp\u003eThe sound of an audio product is more than the the sum of its parts. You can’t simply look at the components used and determine how something is going to sound. Excellent audio requires careful attention to detail and the tuning of every element of the entire system; this includes the analog stages, the power system, the clock and the converter itself. As all of these interact with each other in nonlinear ways, it is the system that determines the performance, and not any of the individual parts.\u003c\/p\u003e\n\u003cp\u003eThe A\/D\/A converters in the LIO-8 mkIV are DC-coupled to the analog I\/O stages so they introduce extremely low phase distortion. The D\/A has no low-frequency filtering. The A\/D converters have an extremely low frequency DC blocking filter that calibrates the input path and removes DC offset with minimal phase shift.\u003c\/p\u003e \n\u003cp\u003eEvery element of the design combines to give you a warm, open 3-dimensional sound that is highly revealing and yet totally natural. Metric Halo mkIV sets a new standard.\u003c\/p\u003e \n\u003cp\u003eIt’s digital with soul.\u003c\/p\u003e \n\u003ch4\u003eOptional Preamps\u003c\/h4\u003e\n\u003cp\u003eThe LIO-8 mkIV supports adding up to 8 channels of Metric Halo’s renowned ULN-R preamps in 4 channel blocks. These boutique preamps are famous for their pristine, low-distortion, completely unveiled sound.\u003c\/p\u003e\n\u003cp\u003eThe ULN-R preamp provides up to 90 dB of digitally-controlled analog gain in precisely recallable 0.5 dB steps. Each input supports independently switchable P48 phantom power.\u003c\/p\u003e \n\u003cp\u003eThe combination of the super transparent ULN-R preamp and Metric Halo’s exclusive insertable Character Component Modeling Processing provides flexibility and sound quality that’s unavailable on any other device. You can transition from a wire-with-gain pre to a gooey tube pre or anything in between; every input can have the right Character for the sound you want.\u003c\/p\u003e \n\u003cp\u003eThe preamp input path on the LIO-8 mkIV always has preamp gain control and has DC blocking for the phantom power, it also supports input levels of up to +20dBu with no fidelity reducing pads, so you can handle high SPL with sensitive mics as well as you can handle extremely low SPL with insensitive mics (like ribbon mics and low output dynamics) while maintaining ultra-low noise.\u003c\/p\u003e \n\u003cp\u003eThe high maximum input level of +20dBu also means that you can use the mic pre input path as an alternative line input path. This feature can be used with the monitor controller to access an additional 8 selectable analog inputs as external sources.\u003c\/p\u003e \n\u003cp\u003eThe LIO-8 mkIV input path features an integrated analog send (pre A\/D converter) which allows the unit to be used as remote controlled analog preamp. MHLink connectivity and control means that your preamps can be really remote (up to 100m away from your control interface) when you need them to be.\u003c\/p\u003e \n\u003cp\u003eThe preamps also offer a send\/return mode where the amplified signal from the preamp is sent to the analog send and the line input is used for the return to the A\/D converter - this allows you to patch analog processing between the preamp and the converter. Finally, you can use the analog send to provide the pre-amplified signal to a backup recording or mixing system; this is a fully analog split that represents a true backup signal with no digital dependencies.\u003c\/p\u003e \n\u003ch4\u003eMonitoring\u003c\/h4\u003e\n\u003cp\u003eMonitoring is critical to the production process at every stage; you need to be able hear exactly what you are working on. Your monitor chain will be limited by the weakest link in the chain. The LIO-8 mkIV integrates a transparent digitally controlled analog monitor controller to ensure that you can connect directly to your reproduction chain without having to reduce the fidelity of your signal with an inferior monitor control system.\u003c\/p\u003e\n\u003cp\u003emkIV hardware includes a relay driven shunt mute circuit on all the analog outputs that prevents transients from getting into your power amps and speakers. The mute is designed to be completely out of the circuit under normal monitoring operations. It automatically protects your monitors during power cycles and sample rate changes.\u003c\/p\u003e \n\u003cp\u003eThe Monitor Controller in the LIO-8 mkIV provides sophisticated monitor control features that are only available in dedicated monitor controllers that surprisingly cost more than the LIO-8 mkIV.\u003c\/p\u003e \n\u003cp\u003eIn addition to all these high-end features, the MH Monitor Controller provides unique support for per-output-path configurable signal processing including EQ, Bass Management and protective limiting. Each output path can have its own signal processing, even if the paths share speakers. This allows you to configure alternate monitoring setups with one monitoring system (for example, you could configure the signal processing to provide a band-limited monitoring path or a path that lacks subwoofer reinforcement).\u003c\/p\u003e \n\u003cp\u003eEach LIO-8 mkIV includes a high quality headphone amplifier with dedicated D\/A conversion (which is the same quality as the primary D\/As in the system), and digitally controlled analog gain control. So you don’t need to add a headphone amp to your system. By default the headphones are configured as a parallel Cue output multed from the Monitor Controller, but you can drive the headphones with an independent mix or you can make them an alternate output for the monitor controller.\u003c\/p\u003e \n\u003ch4\u003e\u003cstrong\u003eCue Control\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003cp\u003eIn addition to monitoring the mix in your control room, multitrack production requires providing multiple output cues to performers, producers and\/or broadcast feeds.\u003c\/p\u003e\n\n\u003cp\u003eThe Monitor Control in 3d is enhanced by a sophisticated Output Cue section that provides you with an arbitrary number of output controls. Each cue can be driven from any of the busses in the system, or it can be set to derive its input from the currently selected source in the Monitor Controller (MC).\u003c\/p\u003e\n\n\u003cp\u003eSince each Cue can be driven by a separate mix bus from the mixer, they are perfect for routing and controlling independent headphone mixes for individual performers.\u003c\/p\u003e\n\n\u003cp\u003eCues can be configured to listen to PFL\/AFL (or not). So for producers and engineers, the cue can follow PFL\/AFL Solo in the mixer while performer and broadcast cues are unaffected by soloing.\u003c\/p\u003e\n\n\u003cp\u003eEach cue has an independent output path which can be set to any of the MC supported output types. Each cue controller uses the MC engine for its control of routing, gain, delay and output graph processing, so it can do all the things the MC can do.\u003c\/p\u003e\n\n\u003cp\u003eCues form the basis of the routing points for Talkback and Listenback.\u003c\/p\u003e\n\n\u003cp\u003eTalkback provides the ability to route a specific input to any sub-set of the cues in the system; it also allows you to control the amount that the Cue source signal is dimmed when talkback is active. The Talkback signal is mixed with the selected source.\u003c\/p\u003e\n\n\u003cp\u003eListenback provides the ability to route the source that the engineer is currently monitoring through the Monitor Controller to any subset of the cues in the system. This allows playing back a mix of the take to any or all of the monitoring cues in the system without having to re-patch.\u003c\/p\u003e\n\u003ch4\u003eUltimate Console and Mixer Solution\u003c\/h4\u003e\n\n\u003cp\u003e\nFor 3d and mkIV, we designed a new, retina-enabled, 64-bit, cross-platform console application: MIO Console 3d.\n\u003c\/p\u003e\n\n\u003cp\u003e\nMIO Console features a high-impact, modern, flat design with scalable UI elements. With user-controllable color \ntheming and extensive support for customizable interaction preferences, it is easy to tune the console to fit your \nstyle (and your eyesight). MIO Console also adds support for standard UI gestures including drag-and-drop for inserts \nand multi-strip control swiping.\n\u003c\/p\u003e\n\n\u003ch4\u003eULN8 mkIV\u003c\/h4\u003e\n\n\u003cp\u003e\nMIO Console provides the UI to control the mkIV Mixer. This mixing engine is a full professional mixing console — \nnot just an interface monitor mixer. It features multi-bus mixing, arbitrary routing, input and output multing, \nzero-latency hardware plug-ins, surround support, and headamp control. The Mixer removes the limits found in other \ninterfaces by providing:\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 128 channels of input (@192k)\u003c\/li\u003e\n  \u003cli\u003eUp to 64 mono busses (@192k)\u003c\/li\u003e\n  \u003cli\u003eMix busses that span all the hardware in your MH system\u003c\/li\u003e\n  \u003cli\u003eMix and panning support from mono up to 7.1\u003c\/li\u003e\n  \u003cli\u003eAutomatic routing to the computer\u003c\/li\u003e\n  \u003cli\u003eCascade assignment of inputs, sends, busses, and plug-ins\u003c\/li\u003e\n  \u003cli\u003eInstantiating plug-ins and graphs with presets\u003c\/li\u003e\n  \u003cli\u003eDragging plug-in inserts within the mixer (including drag-copy)\u003c\/li\u003e\n  \u003cli\u003eUnlimited Parameter Link Groups\u003c\/li\u003e\n  \u003cli\u003eUnlimited DCAs\u003c\/li\u003e\n  \u003cli\u003eUnlimited Mute Groups\u003c\/li\u003e\n  \u003cli\u003eHardware polarity invert\u003c\/li\u003e\n  \u003cli\u003eOn-strip headamp control\u003c\/li\u003e\n  \u003cli\u003ePre- and post-insert direct outs\u003c\/li\u003e\n  \u003cli\u003eHardware I\/O inserts\u003c\/li\u003e\n  \u003cli\u003eLatency-compensated buss-to-buss summing\u003c\/li\u003e\n  \u003cli\u003eSupport for automatic input switching and punch-in with Session\u003c\/li\u003e\n  \u003cli\u003eSupport for automatic Session I\/O routing\u003c\/li\u003e\n  \u003cli\u003eComprehensive metering\u003c\/li\u003e\n  \u003cli\u003eOptional non-destructive AFL\/PFL soloing\u003c\/li\u003e\n  \u003cli\u003eHard Mutes\u003c\/li\u003e\n  \u003cli\u003eFully configurable Main, Aux, and Group busses (up to 64 mono busses)\u003c\/li\u003e\n  \u003cli\u003eAux sends directly on mixer strips\u003c\/li\u003e\n  \u003cli\u003eFlipping Auxes onto the primary mix surface (UI + hardware control surfaces)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThese features unlock mixing workflows designed for live and zero-latency cue mixing during tracking, while also \nenabling full recording and mixing with Session as a dedicated solution.\n\u003c\/p\u003e\n\u003ch4\u003eMHLink Key Features\u003c\/h4\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThere is no latency offset between individual devices. With MHLink, the maximum transport latency between units is 16 microseconds, regardless of whether two units are directly connected or there are 16 additional units in between.\u003c\/li\u003e\n\n  \u003cli\u003eUp to 100 meter MHLink cables — eliminate expensive, heavy, noisy analog snakes. Place your Metric Halo setup where it is best positioned and remove hundreds of meters of analog cabling. Easily connect units with commodity Cat5\/5e cables up to 100 meters per MHLink connection.\u003c\/li\u003e\n\n  \u003cli\u003eSplit systems — with up to 100 meters between units, place your primary system on stage (or in the live room) and your monitor box at FOH (or in the control room). MHLink adds zero latency and provides a common clock; you can even use existing installed wiring.\u003c\/li\u003e\n\n  \u003cli\u003eIntegrated daisy-chain support — no need for Ethernet switches.\u003c\/li\u003e\n\n  \u003cli\u003eMHLink uses true locking connectors to prevent accidental disconnection during critical operation.\u003c\/li\u003e\n\n  \u003cli\u003eMHLink is transformer-coupled at each port, providing full galvanic isolation to protect your recording system from electrical interference and ground loops.\u003c\/li\u003e\n\n  \u003cli\u003eIntegrated, automatic clocking — no need for word clock or additional digital interfaces to perfectly lock multiple MHLink units.\u003c\/li\u003e\n\n  \u003cli\u003eStandards-compliant, supporting both direct and switched computer connections via MHLink.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eInstantly Scalable\u003c\/h4\u003e\n\n\u003cp\u003e\nA unique feature of MHLink is that all Metric Halo interfaces work just as well as a group as they do individually. Mix and match LIO-8 mkIV with other 3d units to create a system that meets your needs for track count and preamp power.\n\u003c\/p\u003e\n\n\u003cp\u003e\nAdding a unit to the system automatically increases the DSP power available, ensuring that your DSP always scales with your I\/O.\n\u003c\/p\u003e\n\n\u003cp\u003e\nBreak your system up for small gigs, or combine units from multiple users to build a massive system when needed — just click to connect!\n\u003c\/p\u003e\n\u003ch4\u003eUSB\u003c\/h4\u003e\n\u003cp\u003eEvery mkIV unit includes an industry standard USB-C port that provides a device port featuring 3 interface endpoints:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB Audio Class 2\u003c\/li\u003e\n  \u003cli\u003eUSB MIDI Class\u003c\/li\u003e\n  \u003cli\u003eMIO Control Class\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThe Audio Class and MIDI Class endpoints support industry-standard protocols and allow the mkIV to be used with \nbuilt-in drivers of any USB host that supports these classes.\n\u003c\/p\u003e\n\n\u003cp\u003e\nYou can transport audio and MIDI to and from computers running macOS, Windows 10 \u0026amp; 11, or Linux without installing \na custom driver.\n\u003c\/p\u003e\n\n\u003cp\u003e\nYou can transport audio and MIDI to and from mobile devices (and embedded devices) that don't allow the installation \nof custom drivers, as long as the devices provide built-in Audio and\/or MIDI class support. At present, iOS devices \n(including iPhone and iPad), Android devices (phones and tablets), and AKAI MPC have the appropriate class drivers included.\n\u003c\/p\u003e\n\n\u003cp\u003e\nMIO Console 3d also controls the unit over USB, so you can connect your computer with a single cable.\n\u003c\/p\u003e\n\n\u003ch4\u003eSCP\u003c\/h4\u003e\n\n\u003cp\u003e\nHave you ever wanted to connect an iPad to your main studio system? How about dedicating an older computer you have \nlaying around to running a VI or a Sampler? What about when a client or collaborator comes in with their laptop and \nwants to run audio into your system? With mkIV and SCP, you can just connect any of these devices right into your \nsystem without having to add another interface for that purpose.\n\u003c\/p\u003e\n\n\u003cp\u003e\nmkIV supports explicit routing to and from the USB connector on any unit in the MHLink chain. When used in this way, \nthe USB ports are referred to as Satellite Computer Ports.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThis feature allows you to integrate audio from multiple USB host devices (computers, phones, tablets, MPCs, etc.) \nwithout purchasing additional interfaces. It automatically keeps your devices synchronized with your system and provides \ndevice-to-device routing as well as integrated mixing and processing.\n\u003c\/p\u003e\n\u003cp\u003e\nYou can connect a sampler running on another computer and directly mix its outputs with the rest of your sources. \nYou can route directly between computers\/devices or multi signals to multiple computers\/devices — so you can set up \na computer or an iPad as an effects rack or backup recorder.\n\u003c\/p\u003e\n\n\u003cp\u003e\nYou can integrate the output of multiple iOS instruments into your MHLink Mixer via the direct digital link, and \nyou can record real-time performances by routing them to your main recording computer.\n\u003c\/p\u003e\n\n\u003cp\u003e\nYou can use the SCP functionality to integrate multiple computers (or iOS devices) into your MHLink mixing engine. \nEach USB port is available for connection with a USB audio host. The SCP USB source and destination categories in \nthe routing selector popups allow you to select explicit USB channels to route to and from.\n\u003c\/p\u003e\n\n\u003cp\u003e\nTo use a USB port as an SCP port, simply connect the device to one of the USB ports on one of the units in your \nMHLink chain. Then on the device, select the USB interface of the connected 3d unit as the audio interface for \nthe device, signal processing software, or DAW.\n\u003c\/p\u003e\n\n\u003cp\u003e\nIt’s as simple as that.\n\u003c\/p\u003e\n\u003ch4\u003eLoopback\u003c\/h4\u003e\n\n\u003cp\u003e\nHave you ever wanted to route audio from one app to another? For example, maybe you want to capture a reference \ntrack from a streaming service, or you need to grab the output of your DAW (post analog processing) and capture it \nto your mastering app. Or perhaps you need to route some audio from a pro app to your teleconferencing software.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe mkIV mixer supports the computer and SCP ports as first-class routing destinations, which makes it easy for \nyou to route any signal back to the computer or any of the SCP ports.\n\u003c\/p\u003e\n\n\u003cp\u003e\nYou can use this feature to route audio between apps on one computer, between different computers, or to mobile devices.\n\u003c\/p\u003e\n\n\u003cp\u003e\nSince the routing points are built into the mixer, the signals you loop back to the computer can be outputs from the \ncomputer, any mix, or the output of any signal processing chain.\n\u003c\/p\u003e\n\n\u003cp\u003e\nYou can use this feature to capture masters, route between your DAW and teleconferencing apps, or between standalone \nVIs and your DAW.\n\u003c\/p\u003e\n\u003ch4\u003eProcessing\u003c\/h4\u003e\n\n\u003cp\u003e\nLIO-8 mkIV includes a sophisticated digital signal processing engine that is only limited by your imagination. \nThe mixing engine and audio router built into each unit is capable of mixing 128 inputs to 64 busses at all sample \nrates (up to 192k) with every gain interpolated on a sample-by-sample basis. This custom dedicated mix engine utilizes \nthe equivalent DSP power of 30 of the SHARC DSPs that were used in our previous generation product (based on the 2d Card).\n\u003c\/p\u003e\n\n\u003cp\u003e\nEach LIO-8 mkIV also includes a programmable DSP that supports the instantiation of arbitrary DSP processing plug-ins; \nthis is used for insert processing in the mixer and for output processing in the Monitor Controller. LIO-8 mkIV includes \nover 100 plugins that you can use for low-latency monitoring, live mixing, or in production. The DSP in 3d has 1GB of \nDDR3 RAM available, so long delays and multiple reverbs are not a problem.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe +DSP license included with every unit provides Metric Halo’s unique Graph insert, which allows you to build your \nown signal chains with arbitrary phase-compensated routing between plugins; think of it as a DSP playground. You can \ninsert a Graph in any insert slot in the mixer and as output processors in the Monitor Controller.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe 3d system enhances the processing engine included in each unit by routing between multiple units and utilizing \nthe resources of all units attached via MHLink as one unified system. Your DSP and mixing resources are pooled. This \nallows you to seamlessly grow your system one unit at a time — all the way up to 128 channels of simultaneous input \nand output! All your inputs (including inputs from the computer) are available as sources in the mixer and monitor \ncontroller. All your outputs (including returns to the computer) are available as destinations for the mixer, monitor \ncontroller, cue system, and direct outs.\n\u003c\/p\u003e\n\u003cp\u003e[tabs] [tab title=\"FEATURES\"]\u003c\/p\u003e\n\u003carticle class=\"webtext\" id=\"desc\"\u003e\n\u003cdiv class=\"webtext-block webtext-switched webtext-block--media-left webtext-block--mixed-content\"\u003e\n\u003cdiv class=\"webtext__column webtext--text\"\u003e\n\u003carticle class=\"webtext\" id=\"desc\"\u003e\n\u003cdiv class=\"webtext-block webtext-switched  webtext-block--text\"\u003e\n\u003cdiv\u003e\n\u003ch4\u003eMetric Halo LIO-8 USB Audio Interface Features:\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple source selection\u003c\/li\u003e\n  \u003cli\u003eMultiple speaker output selection\u003c\/li\u003e\n  \u003cli\u003eOutput paths can share speakers\u003c\/li\u003e\n  \u003cli\u003ePer-speaker gain and delay\u003c\/li\u003e\n  \u003cli\u003ePer-speaker solo\/mute control\u003c\/li\u003e\n  \u003cli\u003eOutput path calibration support\u003c\/li\u003e\n  \u003cli\u003eMultichannel support from Stereo up to 7.1.4 Surround (Dolby Atmos®)\u003c\/li\u003e\n  \u003cli\u003eMono fold-down\u003c\/li\u003e\n  \u003cli\u003eMute and Dim\u003c\/li\u003e\n  \u003cli\u003eAnalog gain control\u003c\/li\u003e\n  \u003cli\u003eTalkback\u003c\/li\u003e\n  \u003cli\u003eListenback\u003c\/li\u003e\n  \u003cli\u003eMultiple cue output support\u003c\/li\u003e\n  \u003cli\u003ePFL\/AFL integration with the mixer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003csection class=\"product-extra-media\"\u003e\u003c\/section\u003e\n\u003cul class=\"webtext-block--colcount\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[\/tab] [tab title=\"SPECIFICATIONS\"]\u003c\/p\u003e\n\u003csection class=\"product-specs\"\u003e\n\u003csection class=\"product-specs\"\u003e\n\u003csection class=\"product-specs\"\u003e\n\u003ctable class=\"table table-striped\"\u003e\n\u003ctbody\u003e\n  \u003ctr\u003e\n    \u003cth\u003eDisplay\u003c\/th\u003e\n    \u003ctd\u003e2x Multi-Segment LED Meter\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003cth\u003eChannels of I\/O\u003c\/th\u003e\n    \u003ctd\u003eAnalog \/ Digital: 8 Inputs \/ 8 Output at 192 kHz\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003cth\u003eBuilt-In DSP\u003c\/th\u003e\n    \u003ctd\u003eYes\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003cth\u003eMaximum Sampling Rate\u003c\/th\u003e\n    \u003ctd\u003e192 kHz \/ 24-Bit\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003cth\u003eNumber of Microphone Inputs\u003c\/th\u003e\n    \u003ctd\u003eNo\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003cth\u003eBuilt-In Microphone\u003c\/th\u003e\n    \u003ctd\u003eNo\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003cth\u003eInput Level Adjustment\u003c\/th\u003e\n    \u003ctd\u003e8x Knob\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eGain\/Trim Range\u003c\/th\u003e\n    \u003ctd\u003eLine Inputs, A\/D Converters: -12 dB to +31.5 dB\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eAnalog Audio I\/O\u003c\/th\u003e\n    \u003ctd\u003e\n      1x DB-25 Balanced Mic\/8-Channel Input\u003cbr\u003e\n      1x DB-25 Balanced Line\/8-Channel Input\u003cbr\u003e\n      2x 1\/4\" TRS Balanced Monitor Output\u003cbr\u003e\n      1x DB-25 Balanced Line\/8-Channel Output\u003cbr\u003e\n      1x DB-25 Balanced 8-Channel Output\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003ePhantom Power\u003c\/th\u003e\n    \u003ctd\u003eNo\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eDigital Audio I\/O\u003c\/th\u003e\n    \u003ctd\u003e1x DB-25 AES3 Input\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eHost Connection\u003c\/th\u003e\n    \u003ctd\u003e1x USB-C (Class-Compliant)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eHost Connection Protocol\u003c\/th\u003e\n    \u003ctd\u003eUSB 2.0\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eUSB (Non-Host)\u003c\/th\u003e\n    \u003ctd\u003eNo\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eSync I\/O\u003c\/th\u003e\n    \u003ctd\u003e\n      1x BNC Word Clock Input\u003cbr\u003e\n      1x BNC Word Clock Output\u003cbr\u003e\n      1x 1\/4\" TS SMPTE Input\u003cbr\u003e\n      1x 1\/4\" TS SMPTE Output\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eNetwork I\/O\u003c\/th\u003e\n    \u003ctd\u003e2x RJ45 MH Link\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eMIDI I\/O\u003c\/th\u003e\n    \u003ctd\u003e\n      1x DIN 5-Pin Input\u003cbr\u003e\n      1x DIN 5-Pin Output\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eExpansion Slots\u003c\/th\u003e\n    \u003ctd\u003e2x Network I\/O Slot\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eWireless\u003c\/th\u003e\n    \u003ctd\u003eProprietary Wireless\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eFrequency Response\u003c\/th\u003e\n    \u003ctd\u003e2.9 Hz to 64.7 kHz ±1 dB (at 192 kHz)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eMaximum Input Level\u003c\/th\u003e\n    \u003ctd\u003e\n      Mic Inputs: +20 dBu\u003cbr\u003e\n      Line Inputs: +24.5 dBu\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eMaximum Output Level\u003c\/th\u003e\n    \u003ctd\u003eAnalog Outputs: +21.5 dBu\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eImpedance\u003c\/th\u003e\n    \u003ctd\u003eMic Inputs: 3.3 Kilohms\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eDynamic Range\u003c\/th\u003e\n    \u003ctd\u003eMic Inputs: 118 dB (A-Weighted)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eTHD\u003c\/th\u003e\n    \u003ctd\u003eDB-25 Mic Inputs: 0.0023% (at 0 dBu)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eEIN\u003c\/th\u003e\n    \u003ctd\u003e\n      Mic Inputs: -130.5 dB (150-Ohm Source)\u003cbr\u003e\n      Mic Inputs: -133.25 dB (0-Ohm Source)\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eDigital Audio\u003c\/th\u003e\n    \u003ctd\u003e\n      Sample Rates: Up to 192 kHz\u003cbr\u003e\n      Sample Rate Conversion: On AES3 Inputs (Any Sample Rate)\u003cbr\u003e\n      Bit Depths: 24-Bit\u003cbr\u003e\n      Latency: D\/A Conversion: 0.2 ms at 192 kHz (Input to Output)\u003cbr\u003e\n      Sync Sources: Internal, MH Link via Ethernet, SMPTE\/LTC, Word Clock\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eMedia\/Memory Card Slot\u003c\/th\u003e\n    \u003ctd\u003eNo\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eOS Compatibility\u003c\/th\u003e\n    \u003ctd\u003emacOS 10.9 or Later\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003ePower Requirements\u003c\/th\u003e\n    \u003ctd\u003eAC\/DC Power Adapter (Included), DC Input\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eAC Input Power\u003c\/th\u003e\n    \u003ctd\u003e100 to 240 VAC, 50 \/ 60 Hz\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eAC\/DC Power Adapter\u003c\/th\u003e\n    \u003ctd\u003e100 to 240 VAC\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003ePower Consumption\u003c\/th\u003e\n    \u003ctd\u003e20 W (Typical)\u003cbr\u003e25 W (Maximum)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eRackmount Size\u003c\/th\u003e\n    \u003ctd\u003e1 U (with Included Hardware)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eDimensions\u003c\/th\u003e\n    \u003ctd\u003e17 x 13 x 1.7\" \/ 432 x 330 x 44 mm\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \n  \u003ctr\u003e\n    \u003cth\u003eWeight\u003c\/th\u003e\n    \u003ctd\u003e6.0 lb \/ 2.7 kg\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n    \u003ctd\u003e000-50047 UPC: 832081000712\n\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003ca class=\"anchor\" id=\"reviews\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003csection class=\"product-reviews\"\u003e\u003cheader class=\"product-reviews__header\"\u003e\u003c\/header\u003e\u003c\/section\u003e\n\u003cp\u003e[\/tab][\/tabs]\u003c\/p\u003e","brand":"Metric Halo","offers":[{"title":"Default Title","offer_id":47530471293142,"sku":null,"price":48995.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1001\/files\/metric-halo-lio-8-usb-audio-interface-1.jpg?v=1764403062","url":"https:\/\/www.musicexperience.co.za\/products\/metric-halo-lio-8-usb-audio-interface","provider":"Music Experience","version":"1.0","type":"link"}