With its extensive range, flat response, and mighty 1,000-watt onboard power amp, Fender’s Tone Master FR-10 powered guitar cab transforms any digital modeling unit into a gig-ready powerhouse rig. Naturally, the Tone Master FR-10 is a perfect choice to pair with Fender’s Tone Master Pro modeler. However, this cab’s full-range, flat-response speaker setup comprising a 10-inch driver and a 1-inch wide dispersion high-frequency driver serves as a blank sonic canvas for a variety of profilers and modelers. Volume is all but an afterthought, thanks to the FR-10’s onboard 1,000-watt power amplifier, and you also get a top-mounted control section with handy volume and EQ controls. Finally, Music Experience guitarists can’t help but appreciate how the FR-10’s lightweight black-Tolex plywood enclosure and metal tilt-back legs capture all the vibe and visuals of a traditional Fender amplifier. This brilliant merger of aesthetics and functionality allows you to capture all the best of modern modeling technology with the timeless aesthetics of Fender’s most iconic amplifiers.
While most digital amp modelers can gig just fine going straight into a PA system, running into a traditional guitar cab is often out of the question without the help of an outboard power amp — just one more thing to lug around to and from the show! To save on space and simplify your setup, Fender’s Tone Master FR-10 powered guitar cabinets come equipped with a massive-sounding built-in 1,000-watt power amplifier that provides more than enough headroom and volume for almost any gig. Not only does this allow you to utilize your digital modeler straight into the Tone Master FR-10 like a traditional guitar amp head, but it also retains all the classic looks that Fender players have favored for decades.
So, you’re all set up onstage, your modeler of choice is precisely rigged to accommodate your set list, and something just feels off. Every room is different, so it’s not uncommon to need to dial in a few EQ tweaks to optimize your sound for your respective setting. Sure, you could reach down and twiddle with the controls on your digital modeler, but the Fender Tone Master FR-10 Powered Cabinet’s onboard EQ controls offer a far more straightforward tone-shaping solution. Like many of Fender’s most legendary amplifier combos, the Tone Master FR-10 Powered Cab sports a complete control section on its top panel, comprising a 3-band active EQ, a high-frequency Cut knob, and a volume control. This superb setup offers a traditional amp-like experience of dialing in your tone onstage, removing any need for menu-diving or touchscreen wrangling with the precise and tactile feel of an old-school amp knob.
When shopping for a powered cab to pair with your Tone Master Pro or other digital modeling unit, a cab that delivers a blank tonal canvas is a must. After all, your modeler is going to do all the heavy lifting, so it’s only natural to seek out a pure, clean, and uncolored cab that can accommodate everything from classic Fender black-panel cleans to screaming full-stack fury. That’s where the “FR” in the Tone Master FR-10 comes in. This powered cabinet boasts a full-range, flat response speaker setup of a specially designed 10-inch speaker paired with a 1-inch wide dispersion high-frequency driver — the perfect tonal base to build upon with your favorite digital rigs.
The Tone Master FR-10 is a full range, flat response powered speaker designed for use with today's digital guitar amp modelers and profilers. Tone Master FR-10 delivers clear and accurate sound reproduction and perfectly replicates every detail of the amp and effect models. They're the ultimate companion to Tone Master Pro and the ideal solution for players who use modelers at home or on stage. The Tone Master FR-10 features an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. The 3-band active EQ and high frequency cut control allow players to fine tune their stage tone without altering the line output signal. Plus, the design of the FR series was inspired by classic Fender amplifiers for an authentic backline look and feel.
Integrated 1,000-watt power amp delivers maximum power without distortion even at high volume levels.
The high-power Fender Special Design speakers are tuned to perfectly reproduce your modeler’s impulse response and speaker cab models.
Fine tune the speaker to different rooms and stages.
At just 26 lbs., the Tone Master FR-10 is extremely light and portable for easy transport to any gig.
Brings the sound to you and maintains an on-axis response even on the smallest stages.
| Speaker Type | Full Range Flat Response |
|---|---|
| Controls | Volume, Treble, Middle, Bass, Cut |
| Inputs | One Balanced 1/4" - XLR Combination |
| Outputs | One - XLR with Ground Lift |
| Channels | One |
| Speaker |
10" Special Design Speaker |
| Horn | 1" Wide Dispersion High Frequency Driver |
| Power | 1,000 Watt Class-D Power Amp |
| Maximum Peak SPL | 130 dB SPL @ 1m 132 dB SPL @ 1m 132 dB SPL @ 1m 132 dB SPL @ 1m |
| Frequency Range | 75Hz-20kHz |
| Series |
ToneMasterPro |
| Enclosure Type | Lightweight Plywood Black Textured Vinyl |
| Features | Integrated Tilt Back Legs |
| Height | 17.13” (43.5 cm) |
| Width | 19.38” (49.2 cm) |
| Depth | 9.63” (24.4 cm) |
| Weight | 25.6 lbs. (11.6 kg) |
| Manufacturer Part Number |
2275106000 885978978434 FR10 |
