The Fender Tone Master Twin Reverb — here in textured Blonde vinyl with an Oxblood grille — is a stunning facsimile of a '60s-era all-tube Twin, built using the latest in Fender digital amplification and loaded with ultralight Celestion neodymium-magnet speakers for a distinct rock 'n' roll voicing. Faithful modeling of the classic tube architecture gives the Tone Master all the headroom, output, and reactivity of the original at a massive weight savings. A solid pinewood cabinet further shaves off poundage. Inside you'll find a pair of 12" Celestion Neo G12 Creamback speakers voiced to handle everything from Midwest indie pop to wide-open hard rock covers. Around back, a 5-way power attenuator transparently reduces wattage to let you achieve just the right tube-flavored cluck and breakup for any live and studio setting. You also get an XLR balanced output with your choice of flat-response or two onboard cab simulations for silent performance and recording.
Using the latest in Fender modeling technology, the Tone Master is able to capture the sound and performance of the seminal all-tube Twin Reverb. The harmonic sparkle. The chewy breakup. The highly reactive tone stack. Even digital models of the iconic spring reverb and tube tremolo. It's all here in the Tone Master Twin Reverb Blonde. And when it comes time to fill a stage, the Tone Master has output to spare — this 200-watt solid-state amp packs SPLs comparable to the 85-watt tube classic.
The Tone Master allows you to dial back wattage to 0.2 watts to achieve the desired level of breakup, even run full tilt, in the quietest rooms and venues.
A pair of hand-picked 12" Celestion G12 Neo Creamback speakers give the Tone Master Twin Reverb Blonde a similar stage-filling punch and vocal-like midrange to the G12M Greenback, beloved by players from Eric Clapton to Eddie Van Halen, but with much higher handling. And thanks to their neodymium magnets, the Neo Creambacks weigh in significantly lighter than their classic counterparts. This helps reduce weight for an easier carry from the car to the stage, with no loss in tone.
The Tone Master Twin Reverb Blonde features a solid pine cabinet for a lighter haul at no compromise to tone. Though looking at it, you'd never know: the textured Blonde vinyl and Oxblood grille cloth give this amp that undeniable Fender appeal.
One of the Tone Master Blonde's more modern features is its XLR balanced output, which is useful for creating a silent stage or recording sets without a mic. Two onboard cab IRs (impulse responses) give you a direct feed out to a soundboard. Here you can choose between the familiar bite of a Shure SM57–miked speaker or the smooth punch of a Sennheiser MD421. Alternatively, a flat-response option provides seamless integration with your existing IRs. There's also a ground switch and level control for noise reduction and proper gain staging.
In a bold Fender first, the Tone Master Twin Reverb Blonde amplifier uses massive digital processing power to achieve a single remarkable sonic feat: faithfully modeling the circuitry and 85-watt power output of an original Twin tube amp. A high-performance 200-watt digital power amp is used to achieve the headroom and dynamic range of a real vintage Twin tube amp. The resonant pine cabinet is paired with two Celestion® NEO Creamback speakers for a more distinctive rock 'n' roll flavor. The result is tubeless Twin Reverb tone, volume and dynamics virtually indistinguishable from the all-tube original. The reverb control has been modified to provide easier fine tuning at lower settings. Perhaps most notably, even with all these features and more, the Tone Master Twin Reverb is in fact about only half the weight of an all-tube Twin. The blonde vinyl covering elegantly evokes classic early-’60s Fender vibe, and front panel features give guitarists a playing experience identical to the tube version, including Fender’s world-standard reverb and tremolo effects. Additional rear-panel features deliver modern convenience and flexibility—including an output power selector for full power and five attenuated settings, balanced XLR line output with impulse response (IR) cabinet simulations captured with Shure SM57 and Sennheiser MD421 microphones, mute switch for silent stage or recording use, USB port for firmware upgrades, and more.
This amp features the most accurate emulation of our original Twin Reverb. Sound like the original, without the extra weight and maintenance.
Our powerful convolution-based technologies recreate the classic reverb and tremolo effects that made our amps famous and inspired new genres of music.
This amp’s rear panel is packed with useful controls and connections: Line Output with Level control, ground lift switch to eliminate hum and a three-way IR cabinet simulation switch to select various microphone options.
Enjoy full, natural tone at almost any volume—from a full 85W of Fender power down to bedroom- and apartment-friendly 1W.
Designed to match the traditional G12M-65 Creamback speaker, the Celestion® Neo Creamback speaker is engineered using lightweight neodymium magnets.
Lighter than plywood, solid pine is a traditional Fender cabinet material from the ‘50s and ’60s, making for more resonant and more “musical” speaker cabinets.
Type |
Solid State with DSP |
---|---|
Number of Channels |
2 |
Total Power |
200W (variable down to 1W) |
Speaker Size |
2 x 12" Celestion G12 Neo Creamback |
Reverb | Yes |
Effects |
Tremolo |
Amp Modeling |
Twin Tube Amp Emulation |
Reverb | Yes |
EQ |
3-band EQ |
Inputs |
2 x 1/4" (normal), 2 x 1/4" (vibrato channel) |
Outputs |
1 x XLR (DI out) |
Footswitch I/O |
1 x 1/4" (channel, effect) |
Footswitch Included |
Yes, 2-button footswitch |
Construction Material |
Lightweight Solid Pine, Blonde Textured Vinyl |
Power Source |
Standard IEC AC cable |
Height |
20.24" |
Width |
26.6" |
Depth |
10.35" |
Weight |
33 lbs. |
Manufacturer Part Number |
2274200982 |